Introduction

An SSD can appear to work normally while its internal health is gradually changing.

If your computer starts taking longer to load files, large file transfers become slower, or the system occasionally experiences unusual storage errors, checking the SSD’s health information can help identify potential problems before they become more serious.

Modern SSDs provide a range of monitoring information through S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) and other health-monitoring attributes.

Depending on the SSD manufacturer, monitoring software may display values such as:

• SSD Health
• Remaining Life
• Percentage Used
• Total Host Writes
• TBW
• SSD Temperature
• Critical Warnings
• Media and Data Integrity Errors
• Unsafe Shutdowns
• Error Log Entries

But what do these numbers actually mean?

More importantly, which values should users pay attention to, and when should an SSD be considered at risk?

This guide explains the most common SSD health indicators and how to interpret them in everyday PC use.

---

1. What Is SSD Health?

SSD Health is a general indication of the remaining condition or expected endurance of an SSD.

Unlike a car dashboard that provides a standardized mileage reading, SSD health information is based on data reported by the drive’s controller and firmware.

A monitoring application may display a value such as:

100% Health

or:

95% Health

or:

70% Health

However, there is an important point to remember:

SSD health percentages are not universally standardized across all manufacturers.

Different SSDs may calculate health differently based on factors such as NAND endurance, host writes, spare blocks, program/erase cycles, and manufacturer-defined thresholds.

Therefore, a health percentage should be treated as an indicator, rather than an exact measurement of the physical condition of every component inside the SSD.

---

2. What Does SSD Health Percentage Mean?

Many SSD monitoring tools provide a simple percentage to make drive health easier to understand.

Par exemple :

These ranges are general guidance rather than universal standards.

An SSD showing 70% health is not necessarily about to fail.

Likewise, an SSD showing 100% health is not a guarantee that the drive cannot experience a sudden hardware or firmware problem.

This is why users should look beyond the single health percentage and examine the underlying SMART information.

---

3. What Is SMART?

S.M.A.R.T. stands for:

Self-Monitoring, Analysis and Reporting Technology.

It is a monitoring system that allows storage devices to report information about their operating condition.

For SSDs, SMART information can include:

• Drive temperature
• Data written
• Power-on hours
• Unsafe shutdowns
• Media errors
• Critical warnings
• Percentage used
• Error information

The exact attributes and names can vary depending on the SSD interface, controller, firmware and manufacturer.

For NVMe SSDs, health information is commonly exposed through the NVMe SMART / Health Information structure.

For SATA SSDs, SMART attributes can be presented differently.

This means that two SSDs may report different health attributes even though both are functioning normally.

---

4. SSD Health vs. SMART Data

It is important to distinguish between the health percentage and the individual SMART indicators.

Think of SSD health as a simplified summary.

SMART data provides more detailed information that helps explain what is happening inside the drive.

Par exemple :

Health: 98%

by itself tells you relatively little.

But if you also see:

• Temperature: normal
• Critical Warning: 0
• Media/Data Errors: 0
• Percentage Used: low
• Error Log Entries: 0

the overall picture is much clearer.

On the other hand:

Health: 98%

combined with:

• Increasing media errors
• Repeated critical warnings
• Rapidly increasing error logs

would deserve much more attention.

Therefore:

Do not rely on the health percentage alone when evaluating an SSD.

---

5. What Is TBW?

TBW stands for:

Total Bytes Written

It is one of the most commonly discussed endurance specifications for SSDs.

For example, an SSD may have a rated endurance of:

600 TBW

This indicates the amount of data written associated with the manufacturer’s endurance specification under its defined testing and warranty conditions.

However:

600 TBW does not mean the SSD will immediately fail after exactly 600 TB of writes.

TBW is an endurance rating, not a precise failure counter.

Actual SSD lifespan can vary depending on:

• NAND type
• Qualité de la NAND
• Write workload
• Amplification de l'écriture
• Operating temperature
• Contrôleur
• Firmware
• Over-provisioning
• Power conditions

A drive can potentially continue operating beyond its rated TBW, while another drive may experience problems before reaching that figure.

---

6. TBW vs. Actual Data Written

These are two different numbers.

Par exemple :

Rated TBW: 600 TB

Host Writes: 120 TB

This means the host system has written approximately 120 TB to the drive, while the product’s rated endurance is 600 TB under the manufacturer’s specified conditions.

That does not mean the SSD has exactly:

80% life remaining.

SSD health calculations may consider more than host writes alone.

The controller may also account for internal NAND usage and other factors.

Therefore:

TBW is an important reference point, but it should not be treated as a precise countdown timer.

---

7. What Is Percentage Used?

NVMe SSDs may report a value called:

Percentage Used

This represents the estimated percentage of the SSD’s endurance that has been consumed according to the drive’s health reporting mechanism.

Par exemple :

Percentage Used = 10

generally indicates that approximately 10% of the endurance estimation has been consumed.

A higher value indicates greater accumulated NAND wear.

When the percentage continues to increase over time, it provides useful information about the drive’s remaining endurance.

However, users should again remember that this is an estimate based on the SSD’s defined endurance model, not a guarantee of remaining operating life.

---

8. NAND Wear and P/E Cycles

The NAND Flash memory inside an SSD has a finite number of Program/Erase (P/E) cycles.

Writing data programs NAND cells, while erasing data prepares cells for reuse.

Over time, repeated program and erase operations contribute to NAND wear.

The SSD controller uses technologies such as:

• Wear leveling
• Garbage collection
• Error correction
• Bad-block management
• Over-provisioning

to manage NAND wear and maintain reliable operation.

This means that an SSD does not simply write repeatedly to the same physical NAND cells.

Instead, the controller attempts to distribute writes across available NAND resources.

As NAND wear accumulates, the SSD’s health indicators can gradually decline.

---

9. SSD Temperature: Why Does It Matter?

Temperature is another important SSD health indicator.

NVMe SSDs, particularly high-performance PCIe 4.0 and PCIe 5.0 models, can generate significant heat during sustained workloads.

Par exemple :

• Transferts de fichiers volumineux
• Video editing
• Game installation
• Benchmarking
• Large database workloads
• Continuous sequential writes

can increase SSD temperature.

High temperature does not automatically mean that an SSD is failing.

Modern SSDs typically include thermal management mechanisms.

When temperature becomes too high, the SSD may reduce performance to control heat.

This is known as:

Thermal Throttling

---

10. What Happens When an SSD Overheats?

If an SSD repeatedly reaches high temperatures, several things can happen.

1. Sequential Performance May Drop

The SSD may reduce its operating speed to control temperature.

2. Sustained Write Performance Can Decline

Large file transfers may become slower after prolonged operation.

3. Performance Can Become Less Consistent

Short benchmark results may look excellent while long workloads show lower sustained performance.

4. Long-Term Reliability Can Be Affected

Repeated operation under excessive thermal conditions is generally undesirable for electronic components.

The exact temperature limits vary by SSD model and controller.

Therefore, users should always compare the observed temperature with the manufacturer’s specifications rather than applying one universal temperature limit to every SSD.

---

11. What Is Critical Warning?

For NVMe SSDs, Critical Warning is one of the most important health indicators.

If the value is:

0

there is generally no active critical warning reported through that field.

If a critical warning is reported, the user should investigate the cause.

Depending on the specific condition, a warning can be associated with issues such as:

• Reliability degradation
• Temperature threshold conditions
• Spare capacity problems
• Device reliability concerns

A critical warning should not be ignored simply because the overall health percentage still looks high.

---

12. What Are Media and Data Integrity Errors?

Another important indicator is:

Media and Data Integrity Errors

This value relates to errors where the controller detects problems with data integrity or the underlying media.

For a healthy SSD, this value would normally remain:

0

If the number begins increasing, the situation deserves attention.

A single reported error does not automatically mean immediate SSD failure, but a continuously increasing error count is a much stronger warning sign.

Users should:

1. Back up important data
2. Monitor whether the value continues increasing
3. Check other SMART information
4. Review the SSD manufacturer’s diagnostic tools
5. Consider replacing the drive if the problem persists

---

13. What Are Unsafe Shutdowns?

Unsafe Shutdowns record situations where the SSD loses power without completing a normal shutdown procedure.

This can happen because of:

• Sudden power loss
• Forced shutdown
• System crash
• Power supply interruption
• Resetting the system
• Removing power unexpectedly

A high unsafe-shutdown count does not automatically mean the SSD is defective.

For example, a PC that has experienced many power outages may naturally have a high number.

However, frequent unsafe shutdowns are worth investigating because repeated unexpected power loss can complicate storage operations and may contribute to data integrity issues depending on the circumstances.

If unsafe shutdowns are increasing rapidly, check:

• Power supply
• UPS or surge protection
• System stability
• Operating system crashes
• BIOS settings
• Gestion de l'énergie

---

14. What Are Error Information Log Entries?

Some NVMe SSDs provide:

Error Information Log Entries

This value records certain errors reported by the device.

An increasing error count should be investigated, particularly when it appears together with:

• Critical Warnings
• Media/Data Integrity Errors
• Unexpected system behavior
• File read/write failures
• SSD detection problems

A single historical error does not necessarily mean that the SSD is failing.

Le trend is often more useful than the absolute number.

---

15. Which SSD Health Values Should You Watch Closely?

For everyday users, it is not necessary to monitor every SMART attribute every day.

A practical set of indicators includes:

The most important point is to look for changes over time.

A single number often provides less information than a trend.

---

16. What Are the Warning Signs of a Potentially Unhealthy SSD?

Users should pay particular attention if several symptoms appear together.

Performance suddenly drops

Especially if the SSD previously operated normally.

Files take longer to open

Unexpected increases in access time can sometimes indicate a storage problem.

File transfer errors occur

Repeated read/write errors should never be ignored.

The SSD occasionally disappears

If the BIOS or operating system intermittently fails to detect the drive, investigate the issue immediately.

SMART reports critical warnings

This should be treated seriously.

Media/Data Integrity Errors increase

A continuously increasing value is a significant warning sign.

Health declines unusually quickly

A rapid change can justify further investigation.

The SSD repeatedly overheats

Frequent thermal throttling can affect performance and should be addressed.

---

17. What Problems Can a Failing SSD Cause?

An SSD that is experiencing serious hardware, NAND, controller or firmware problems can potentially cause:

Slow Performance

Read/write performance may become inconsistent or decline.

File Read/Write Errors

Users may encounter errors when opening, copying or saving files.

Application Crashes

Programs that depend heavily on storage access may become unstable.

Operating System Problems

Severe storage errors can contribute to system crashes or boot problems.

SSD Detection Failures

In serious cases, the SSD may no longer be correctly detected by the BIOS or operating system.

Data Loss

The most serious potential consequence is loss of inaccessible or corrupted data.

This is why SSD health monitoring should be combined with regular backups.

---

18. How Often Should You Check SSD Health?

For a normal home or office PC, there is usually no need to check SSD health every day.

A practical approach is:

Normal Users

Check every few months.

PC de jeu

Check periodically, especially if the SSD is used heavily for game installations and large data transfers.

Créateurs de contenu

Monitor more frequently if the SSD is used for:

• Video editing
• Large project files
• Scratch disks
• Frequent large file transfers

Workloads With Heavy Writes

For systems performing large amounts of continuous data writing, more frequent monitoring can be useful.

The key is not how often you open the monitoring software, but whether you notice abnormal changes over time.

---

19. What Should You Do If SSD Health Is Declining?

A declining health percentage does not necessarily mean that the SSD needs to be replaced immediately.

Instead, follow a structured process.

Step 1: Back Up Important Data

This should always be the first priority.

Step 2: Check SMART Data

Look beyond the health percentage.

Check:

• Percentage Used
• Température
• Critical Warning
• Media/Data Integrity Errors
• Error Logs

Step 3: Check the Trend

Compare the current readings with previous measurements.

Step 4: Check SSD Temperature

If the SSD is running excessively hot, improve airflow or cooling.

Step 5: Check Firmware

Make sure the SSD is running an appropriate firmware version recommended by the manufacturer.

Step 6: Investigate System Power

If unsafe shutdowns are increasing, investigate the power supply and system stability.

Step 7: Plan Replacement When Necessary

If critical warnings, increasing errors or serious performance problems appear, replacing the SSD before complete failure is a safer approach.

---

20. SSD Health Is Not the Same as SSD Performance

This is another important distinction.

An SSD can have:

100% Health

and still show poor performance because of:

• L'étranglement thermique
• Incorrect PCIe configuration
• Insufficient cooling
• Full-drive conditions
• Firmware configuration
• Background workloads
• SLC cache behavior

Likewise, an SSD with:

80% Health

can still deliver normal performance.

Therefore:

SSD health and SSD performance are related, but they are not the same measurement.

Health indicators primarily help monitor endurance and potential reliability issues, while performance testing measures how quickly the SSD can actually process data.

---

21. Why SSD Health Should Be Viewed as a Combination of Indicators

No single number can fully describe an SSD’s condition.

A better approach is to consider:

Health + Wear + Temperature + Errors + Usage

Par exemple :

Scenario A

Health: 95%

Critical Warning: 0

Media Errors: 0

Temperature: Normal

This generally presents a normal picture.

Scenario B

Health: 95%

Critical Warning: 1

Media Errors: Increasing

This deserves immediate investigation even though the health percentage still looks high.

Scenario C

Health: 70%

Critical Warning: 0

Media Errors: 0

Temperature: Normal

The drive has accumulated significant wear, but there may be no immediate indication of a critical failure.

These examples show why looking at the complete SMART picture is more useful than focusing on one percentage.

---

22. SSD Health From a Manufacturer’s Perspective

SSD health monitoring is only one part of long-term SSD reliability.

The reliability of an SSD begins well before the product reaches the user’s PC.

Important factors include:

• NAND Flash quality
• NAND validation
• Controller selection
• Firmware development
• Error correction
• Gestion thermique
• Gestion de l'énergie
• PCB and component design
• Performance validation
• Endurance testing
• Compatibility testing
• Batch consistency

The relationship can be simplified as:

NAND + Controller + Firmware + Hardware Design + Validation → SSD Reliability

A strong SSD supplier therefore needs to control more than the headline sequential read/write speed.

Consistent NAND sourcing, appropriate controller and firmware matching, thermal validation and production quality control all contribute to long-term product reliability.

---

23. How Oreton Approaches SSD Quality

Au Oreton, SSD quality starts before the drive reaches the end user.

Our approach focuses on the complete SSD architecture, including NAND Flash, controllers, firmware, hardware design and product validation.

Performance is evaluated not only through peak benchmark numbers, but also through areas such as:

• Sequential performance
• Random performance
• Sustained performance
• Thermal behavior
• Compatibilité
• Stabilité
• Batch consistency

This approach helps ensure that SSD products are designed for consistent performance across real-world PC applications.

For OEM customers, distributors and system builders, this consistency is particularly important.

A product that performs well in a single sample is only the beginning.

Reliable SSD supply requires consistent components, controlled production and repeatable validation across production batches.

---

Conclusion

Checking SSD health is a simple but useful part of PC maintenance.

The most important indicators include:

SSD Health

Provides a simplified overview of the drive’s reported condition.

TBW

Provides an endurance reference based on the manufacturer’s specifications.

Percentage Used

Indicates estimated endurance consumption on supported SSDs.

Température

Helps identify potential thermal issues and performance throttling.

Critical Warning

Should be investigated immediately when a warning is reported.

Media and Data Integrity Errors

Should be monitored carefully, especially if the value continues to increase.

Unsafe Shutdowns

Record unexpected power-loss events and can help identify system power or stability issues.

Error Information

Can provide additional clues when storage problems occur.

Most importantly, users should look at trends rather than isolated numbers.

A declining health percentage does not automatically mean an SSD is about to fail, while a high health percentage does not guarantee that every component is operating perfectly.

If important SMART indicators begin showing abnormal changes, the safest approach is to back up important data first, investigate the cause, and plan replacement before a serious failure occurs.

For SSD manufacturers and suppliers, however, reliability starts much earlier—with NAND selection, controller and firmware matching, thermal and compatibility validation, production testing and batch consistency.

A healthy SSD is not simply a drive with a good health percentage. It is the result of a storage platform designed, validated and manufactured for reliable performance throughout its intended lifecycle.